

| Item | Specification |
| Dimension | 80*53*21mm |
| Weight | 162g |
| GSM Module | Quectel EG915U |
| GPS Module | Quectel L70-R |
| Input Voltage | DC 8~92V/1.5A |
| Internal Battery | 700mAh/3.7V |
| Power Consumption |
7.8mA standby current 37~185mA at 10 seconds regular tracking mode (GPS signal available). Max 185mA at GPRS data transmitting moment. |
| Internal Battery Life |
8 hours at every 30 seconds time interval 12.8 hours at every 300 seconds time interval |
|
Operating Temperature |
-20℃~70℃ |
| Humidity | 5%~95% |
| LED Light | 3 LED lights indicating GPS/GSM/External power status |
| Button/ Switch | 1 power switch (inside case) |
| Flash Memory | 8MB (GPRS data 10200 units, SMS data 320 units) |
|
GSMFrequency (2G) |
850/900/1800/1900 MHz |
|
UMTSFrequency (3G) |
Don’t support |
| FDD-LTE (4G) | B1/B3/B5/B7/B8/B20/B28 |
| GPS Sensitivity | -165dBm |
| GPS Start Speed |
Cold start 35s Hot start 1s |
| Position Accuracy | 10m |
| I/O Port |
1 Digital input, positive, default for ACC detection. 1 Analog input, voltage range is 0-36V, can be converted to input1 by command B18. Default is analog input. 1 Output 1 RS232 port for RFID/Camera/Ultrasonic fuel sensor/Fingerprint scanner (Optional) 1 USB port (inside case) |
| I/O | Color | Function |
| VCC | Red | Positive power, connect to positive of vehicle battery, input voltage range 8-92V |
| GND | Black | Ground, connect to negative of vehicle battery or the vehicle’s iron part. |
| IN2 | White | Digital input2, positive input, default connect to ACC for status detection. |
| AD1 | Blue |
12 bits analog input, voltage range 0-36V, adjustable, default 0-5V range. Connect to external sensor. For example, fuel sensor. AD1 is smart, can be converted to input1 by command B18. |
| OUT1 | Yellow |
Output1 Output active: low level (0V) Output inactive: open drain (OD) Max open-drain (inactive) voltage: 45V Max current for output low voltage (valid): 500mA |
| RS232 Port | Orange | DC5V |
| Black | Ground | |
| Green | Sensor_RS232_TX | |
| Purple | Sensor_RS232_RX |